Checking System Information; Checking Remaining Memory Space And Battery Status - Omron F250-UME Software Manual

Checking System Information

5-9 Checking System Information
5-9-1

Checking Remaining Memory Space and Battery Status

SeeAlso
Use the following procedure to check the remaining work memory and internal
flash memory and the status of the battery mounted for date and time data
backup.
1. Enter System mode and select System information.
Refer to
The Memory capacity/Version Menu will be displayed.
2. Select Memory capacity.
The memory capacity will be displayed.
Free space
Memory capacity
Press the Down Key to scroll down and display the rest of the information.
The battery status will be displayed at the bottom of the list.
If Insufficient is displayed, the battery must
be replaced. Take the Controller to your
OMRON representative to replace the
battery. The battery must be changed by a
professional.
3. Select OK to exit this screen.
The screen in (1.) will return.
.
Memory capacity
Version
Total space
Work memory(Main)
11992/16384 KB
Work memory(Model)
7168/ 7168 KB
Work memory(RT Search)
511/ 511 KB
Flash memory(Data)
2048/ 3840 KB
OK
Flash memory(Data)
2048/ 3840 KB
Battery Sufficient
OK
Section 5-9
5-(35)