Ec Positioning - Omron F250-UME Software Manual

EC Positioning

2-16 EC Positioning
HELP
2-16-(1)
The EC Positioning processing item finds positioning marks using shape infor-
mation, such as "round" or "angular." High precision positioning is possible
even if the measurement object is deformed or chipped.
This processing item can also be used with low contrast images.
Positioning Marks
Positioning marks can be found even
under the following conditions.
Internally Chipped
deformed
This function can be used for positioning
of a variety of shapes.
Refer to
Deformed Low
contrast
for information on edge codes (EC).
Section 2-16