Table of Contents
Advertisement
QUEST Character Verification
STEP 2: Defining Symbol Positions
1.
Select Character conditions.
1.QUEST OCV
The settings selections will be displayed.
2.
Select Font.
The Font Settings Screen will be displayed.
Font
3.
Set the font conditions.
4.
Select End.
The settings will be registered and the screen in (1.) will return.
The meanings of the comma ( ), dash (-), and period (.) differ depending on
their position. If the character string to be verified contains any of these sym-
bols, the correct position of the whole character string must be set.
The lowest position in the character string is 100 and the highest position is 0.
Set the range within these limits for the symbols to be evaluated.
0
100
0
100
Measurement image
Extract conditions
Character conditions
K B - 6 5 7 6 2
Measurement conditions
Select region
0 1 . 1 1. 0 7
Judgement conditions
Refer string
Font
Symbol
Date
Slender character
Printer
:
IJP font
:
Laser font
:
Stamp font
:
End
,
2000 11 1
Section 2-21
IJP
All
All
All
70 to 100
40 to 70
2-21-(16)
Advertisement
Chapters
Table of Contents
