Image Size - Omron F250-UME Software Manual

Screen Display and Monitor
Note *The asterisk (*) indicates the default setting.
CHECK

Image Size

All
Reduced
5-(8)
Selection
Last NG (before The image of the latest image to receive an overall judgement of
scroll) NG is displayed.
If position displacement compensation is set, an unscrolled
image will be displayed. The region will be scrolled the position
displacement amount.
The latest measurement results are always displayed for overall
judgement and measurement time.
Be careful, because the display image and the overall judgement
will not match when this image type is selected if the latest mea-
surement gave an OK judgement.
Overall judgement
The following operations cannot be performed, while the last NG
image is being displayed.
• Re-measurement
• Display capture
• Line Brightness display
• Stored image display
When operations other than measurement are performed, the lat-
est NG image will be cleared and the display will remain clear
until the next NG result is returned.
Last NG (after The image of the latest image to receive an overall judgement of
scroll) NG is displayed.
If position displacement compensation is set, an image scrolled
the position displacement amount will be displayed.
All other operations are the same as for Last NG (before scroll).
When After scroll is selected, the measurement times will be lengthened by
the following amounts:
Frame images: (No. of displayed images)
Field images: (No. of displayed images)
Select the size of the image in relation to the screen.
One image will cover the whole screen. This is the default setting.
Depending on the number of units set for the displayed scene under Camera
image/Switch camera, 1 to 4 screens will be reduced and displayed.
Details
Measurement time
OK 100ms
0.Scn 0 RUN
NG region
Last NG
Most recent NG image
16.7 ms
8.3 ms
Section 5-3