Omron F250-UME Software Manual page 869

Normal Serial Interface
CHECK
SeeAlso
Function 2
CHECK
SeeAlso
Function 3
CHECK
SeeAlso
Function 4
6-2-2-13 MENUKEY
Function
Set Normal data to the unit to output measurement results. Only the command
response will be output if Normal data is not set.
Refer to
Executes one measurement on the image being displayed.
Input
MEASURE /I Delimiter
Output
Command executed correctly:
Command not executed correctly:
Set Normal data to the unit to output measurement results. Only the command
response will be output if Normal data is not set.
Refer to
Starts continuous measurement.
Input
MEASURE /C Delimiter
Output
Command executed correctly:
Command not executed correctly:
Set Normal data to the unit to output measurement results. Only the command
response will be output if Normal data is not set.
Refer to
Stops continuous measurement.
Input
MEASURE /E Delimiter
Output
Command executed correctly:
Command not executed correctly:
Switches the serial interface input to Menu Operation mode.
Input
MENUKEY Delimiter
Output
None
.
Measurement result Delimiter
OK Delimiter
ER Delimiter
.
OK Delimiter (One time)
Measurement result Delimiter (Continu-
ous measurement)
ER Delimiter
.
OK Delimiter
ER Delimiter
Section 6-2
6-2-(19)