Table of Contents
Advertisement
ECM Search
2-23-(11)
6.
Select Add to draw more figures. Up to 8 figures can be drawn.
7.
Repeat steps 3 to 5 as necessary to create the desired shape.
8.
Select End to finish drawing.
The settings will be registered and the screen in (1.) will return.
Correcting or Clearing Figures
1.
In the screen for step 6 above, select the figure to be changed or cleared
using the Up and Down Keys and press the ENT Key.
Mask
The figure for the figure number selected using the cursor will be displayed
with solid lines. The selections Correct and Clear will be displayed.
2.
Select either Correct or Clear and press the ENT Key.
If Correct is selected, the cursor will be displayed. Correct the size and po-
sition of the figure as desired.
If Clear is selected, the selected figure will be cleared.
Once 8 figures have been drawn,
Add will no longer be displayed.
Mask
Add
Figure0
Figure1
End
Figure 0
Add
Figure0
Figure1
End
Correct
Clear
Section 2-23
Figure 1
Advertisement
Chapters
Table of Contents
