Table of Contents
Advertisement
Command Reference Guide
ip address negotiated
Use the ip address negotiated command to allow the interface to negotiate (i.e., be assigned) an IP
address from the far-end Point-to-Point Protocol (PPP) connection. Use the no form of this command to
disable the negotiation for an IP address. Variations of this command include:
ip address negotiated
ip address negotiated <administrative distance>
ip address negotiated <ip address>
ip address negotiated <ip address> no-default
ip address negotiated track <name>
ip address negotiated track <name> <administrative distance>
Syntax Description
<administrative distance>
<ip address>
no-default
track <name>
Default Values
By default, the interface is not assigned an address.
Also by default, the administrative distance value is 1.
Command History
Release 5.1
Release 13.1
60000CRG0-35E
Optional. Specifies the administrative distance to use when adding the PPP
route to the route table. It is used to determine the best route when multiple
routes to the same destination exist. The lower the administrative distance,
the more reliable the route. Range is 1 to 255.
Optional. Specifies a valid IP address. IP addresses should be expressed in
dotted decimal notation (for example, 10.10.10.1).
Optional. Prevents the insertion of a default route. Some systems already
have a default route configured and need a static route to the PPP interface
to function correctly.
Optional. Attaches a network monitoring track to the PPP interface. The
negotiated default route for this client will only reside in the route table while
the track is in the pass state. For more information on configuring track
objects, refer to
track <name> on page
Command was introduced.
Command was expanded to include the track and administrative distance.
Copyright © 2012 ADTRAN, Inc.
PPP Interface Command Set
1372.
2496
Advertisement
Table of Contents
