ADTRAN AOS Version R10.1.0 Command Reference Manual page 2485

Command Reference Guide
dial-backup redial-delay <value>
Use the dial-backup redial-delay command to configure the delay after an unsuccessful call until the call
will be re-tried. Use the no form of this command to return to the default setting. For more detailed
information on dial-backup functionality, refer to the Functional Notes and Technology Review sections of
the command dial-backup call-mode on page
Syntax Description
<value>
Default Values
By default, dial-backup redial-delay is set to 10 seconds.
Command History
Release 1.1
Release 5.1
Usage Examples
The following example configures a redial delay of 25 seconds on this endpoint:
(config)#interface ppp 1
(config-ppp 1)#dial-backup redial-delay 25
60000CRG0-35E
2475.
Specifies the delay in seconds between attempting to redial a failed backup
attempt. Range is 10 to 3600 seconds.
Command was introduced.
Command was expanded to include the Point-to-Point Protocol (PPP)
interface.
Copyright © 2012 ADTRAN, Inc.
PPP Interface Command Set
2485