ADTRAN AOS Version R10.1.0 Command Reference Manual page 2481

Command Reference Guide
dial-backup maximum-retry <value>
Use the dial-backup maximum-retry command to select the number of calls the router will make when
attempting to backup a link. Use the no form of this command to return to the default state. For more
detailed information on dial-backup functionality, refer to the Functional Notes and Technology Review
sections of the command
Syntax Description
<value>
Default Values
By default, dial-backup maximum-retry is set to 0 attempts.
Command History
Release 1.1
Release 5.1
Usage Examples
The following example configures AOS to retry a dial-backup call four times before considering backup
operation not available:
(config)#interface ppp 1
(config-ppp 1)#dial-backup maximum-retry 4
60000CRG0-35E
dial-backup call-mode on page
Selects the number of call retries that will be made after a link failure. Valid
range is 0 to 15 attempts.
Setting this value to 0 will allow unlimited retries during the time the network
is failed.
Command was introduced.
Command was expanded to include the Point-to-Point Protocol (PPP)
interface.
Copyright © 2012 ADTRAN, Inc.
PPP Interface Command Set
2475.
2481