Ipv6 Unnumbered - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
ipv6 unnumbered
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ipv6 unnumbered interfaceType interfaceSpecifier
no ipv6 unnumbered
Command introduced before JunosE Release 7.1.0.
Enables or disables IPv6 processing on an interface without assigning an explicit IPv6
address to that interface. The global IPv6 address of the interface, specified by the
interfaceType interfaceSpecifier values, becomes the source address in packets that the
unnumbered interface generates. The no version of the command removes the IPv6
address from the interface.
NOTE: Enabling IPv6 on an interface automatically configures the link-local address
on an unnumbered interface.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Interface Configuration, Profile Configuration
Chapter 10: I Commands
1113
Advertisement
Table of Contents
