Table of Contents
Advertisement
ipv6 unnumbered
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ipv6 unnumbered interfaceType interfaceSpecifier
no ipv6 unnumbered
Command introduced before JunosE Release 7.1.0.
Enables or disables IPv6 processing on an interface without assigning an explicit IPv6
address to that interface. The global IPv6 address of the interface, specified by the
interfaceType interfaceSpecifier values, becomes the source address in packets that the
unnumbered interface generates. The no version of the command removes the IPv6
address from the interface.
NOTE: Enabling IPv6 on an interface automatically configures the link-local
address on an unnumbered interface.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Interface Configuration, Profile Configuration
Chapter 10: I Commands
1115
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 and is the answer not in the manual?
Questions and answers