Policy Action Shared - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

QoS Policy Commands

policy action shared

Enables queues created by a particular action to be shared.
policy action action_name shared
policy action action_name no shared
Syntax Definitions
action_name
Defaults
By default, queues created by an action are not shared.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
If multiple rules have the same action, more than one flow may be scheduled on the same queue if the
queue is defined as shared; otherwise, a separate queue is created for each flow.
•
Note that flows must be sent over the same virtual port for the flows to share a queue. For example,
flows with the same 802.1Q tag may share the same queue.
•
Use the no form of the command to disable sharing.
Example
-> policy action action5 shared
-> policy action action5 no shared
Release History
Release 6.1; command was introduced.
Related Commands
qos apply
policy action
show policy action
OmniSwitch CLI Reference Guide
The name of the action.
Applies configured QoS and policy settings to the current configuration.
Creates a policy action.
Displays information about policy actions.
June 2012 page 33-137