Policy Action Cir - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Alcatel-lucent omniswitch 6850-48: reference guide

Hide thumbs Also See for OmniSwitch 6850-48:

Table of Contents

QoS Policy Commands

policy action cir

Configures a Tri-Color Marking (TCM) policy action. This type of action consists of parameters for

Committed Information Rate (CIR), Committed Burst Size (CBS), Peak Information Rate (PIR), Peak

Burst Size (PBS), and the counter color mode. TCM marks packets red, green, or yellow based on the

parameter values of this policy action. The counter color mode determines which packets marked by this

policy action are counted based on the resulting color of the packet.

policy action action_name cir bps [cbs byte] [pir bps] [pbs byte] [counter-color [red-nonred | green-

nongreen | green-red | green-yellow | red-yellow]]

policy action action_name no cir bps

policy action action_name no pir bps

Syntax Definitions

green-yellow

green-nongreen

counter-color

Platforms Supported

OmniSwitch 6400, 6850, 6850E, 6855, 9000E

Usage Guidelines

Use the no form of this command to remove the TCM parameter values.

OmniSwitch CLI Reference Guide

The name of the action.

The burst size value, in bits per second.

The desired value for maximum bucket size, in bytes.

Count the number of packets marked green (low drop precedence) and

the number of packets marked red (packet is dropped). Packets marked

yellow (high drop precedence) are not counted.

Count the number of green and yellow packets. Red packets are not

Count the number red and yellow packets. Green packets are not

Count the number of red and non-red (yellow and green) packets.

Count the number of green and non-green (yellow and red) packets.

10K (50K on 9000E)