Policy Action Dscp - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

policy action dscp

Configures a Differentiated Services Code Point (DSCP) value to be set in an outgoing flow for traffic that
matches rules with this action.
policy action action_name dscp dscp_value
policy action action_name no dscp
Syntax Definitions
action_name
dscp_value
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the no form of this command to remove a DSCP value from a policy action.
•
Note that specifying both ToS and DSCP in the same action is not allowed.
Examples
-> policy action action2 dscp 61
-> policy action action2 no dscp
Release History
Release 6.1; command was introduced.
Related Commands
qos apply
policy action
show policy action
page 33-152
The name of the action.
The DSCP value to be set, in the range 0–63.
Applies configured QoS and policy settings to the current configuration.
Creates a policy action.
Displays information about policy actions.
QoS Policy Commands
OmniSwitch CLI Reference Guide June 2012