Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2341

QoS Policy Commands
-> policy condition cond3 inner 802.1p 2-5
-> policy condition cond3 no inner 802.1p
-> policy condition cond2 no inner 802.1p
Release History
Release 6.3.1; command was introduced.
Release 6.4.3; ability to specify a range of 802.1p values was added.
Related Commands
qos apply
policy condition
policy condition 802.1p
show policy condition
MIB Objects
alaQoSConditionTable
alaQoSConditionName
alaQoSConditionInner8021p
alaQoSConditionInner8021pEnd
alaQoSConditionInner8021pStatus
alaQoSAppliedConditionTable
alaQoSAppliedConditionName
alaQoSAppliedConditionInner8021p
alaQoSAppliedConditionInner8021pEnd
alaQoSAppliedConditionInner8021pStatus
OmniSwitch CLI Reference Guide
Applies configured QoS and policy settings to the current configuration.
Creates a policy condition.
Configures the 802.1p value for a policy condition.
Shows information about policy conditions configured on the switch.
June 2012 page 33-121