Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2353

QoS Policy Commands
Usage Guidelines
•
Any condition parameters that the hardware supports will be used to classify the traffic; any condition
parameters that are not supported by the hardware will not be used to classify traffic, and the event will
be logged in the QoS log.
•
Bandwidth and queue parameters may be specified when the action is created or may be specified as
separate commands.
•
Use the qos apply
•
Use the no form of the command to remove a QoS action from the configuration.
•
If the snapshot command is entered after the policy action command is configured, the resulting
ASCII file will include the following additional syntax for the policy action command:
from {cli | ldap | blt}
This syntax indicates how the action was created. The cli and ldap options may be changed by a user
modifying the ASCII file; however, changing this setting is not recommended. The blt option indi-
cates a built-in action, this setting is not configurable.
Examples
-> policy action action1 accept
Release History
Release 6.1; command was introduced.
Related Commands
policy condition
qos apply
show policy action
MIB Objects
alaQoSActionTable
alaQoSActionName
alaQoSActionSource
alaQoSActionDisposition
alaQoSActionMinimumBandwidth
alaQoSActionMaximumBandwidth
alaQoSActionPeakBandwidth
alaQoSActionPriority
alaQoSActionShared
alaQoSActionMaximumBuffers
alaQoSActionMaximumDepth
alaQoSActionCIR
alaQoSActionCIRStatus
alaQoSActionCBS
alaQoSActionCBSStatus
alaQoSActionPIR
alaQoSActionPIRStatus
alaQoSActionPBS
OmniSwitch CLI Reference Guide
command to activate configuration changes.
Configures a condition associated with the action.
Applies configured QoS and policy settings to the current configuration.
Displays information about policy actions.
June 2012 page 33-133