Policy Action Mirror - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

QoS Policy Commands

policy action mirror

Mirrors ingress, egress, or both ingress and egress packets that match a mirroring policy to the specified
port.
policy action action_name [ingress | egress | ingress egress] mirror slot/port
policy action action_name no mirror slot/port
Syntax Definitions
action_name
ingress
egress
ingress egress
slot/port
Defaults
parameter
ingress | egress | ingress egress ingress
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the no form of the command to remove mirror from the policy action.
•
Use this command to configure a mirror-to-port (MTP) action that is used for policy based mirroring.
•
Only one MTP session is supported at any given time. As a result, all mirroring policies should specify
the same MTP port.
•
Policy based mirroring and the port based mirroring feature can run simultaneously on the same
switch.
Examples
-> policy action a1 mirror 1/7 (default ingress)
-> policy action a1 ingress mirror 1/7
-> policy action a1 egress mirror 1/7
-> policy action a1 ingress egress mirror 1/7
-> policy action a1 no mirror
Release History
Release 6.3.1; command was introduced.
OmniSwitch CLI Reference Guide
The name of the action.
Mirrors ingress packets.
Mirrors egress packets.
Mirrors ingress and egress packets.
The slot and port number that will receive the mirrored traffic.
default
June 2012 page 33-165