policy action no-cache
Prevents entries from being added to the hardware cache or TCAM and treats the policy as a software
policy by sending all packets to the CPU to be processed.
policy action action_name no-cache
policy action action_name no no-cache
Syntax Definitions
action_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the no form of this command to remove no cache from the policy action.
•
Recommended for use on traffic destined for the switch.
•
This command is useful to reduce hardware ACL entries by moving switch access ACLs to the CPU.
Examples
-> policy action nc01 no-cache
-> policy action nc01 no no-cache
Release History
Release 6.1.1; command was introduced.
Related Commands
qos apply
show policy action
MIB Objects
alaQoSActionTable
alaQoSActionName
alaQoSActionNocache
alaQoSAppliedActionTable
alaQoSAppliedActionName
alaQoSAppliedActionNocache
page 33-164
The name of the action.
Applies configured QoS and policy settings to the current configuration.
Displays information about policy actions.
QoS Policy Commands
OmniSwitch CLI Reference Guide
June 2012