Sflow Agent - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

sFlow Commands

sflow agent

Configures a specific sflow agent IP address.
sflow agent ip <ip_address>
no sflow agent ip <ip_address>
Syntax Definitions
ip_address
Defaults
parameter
ip-address
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to delete the IP address.
•
If no IP address is configured 0.0.0.0 is used.
•
If no IP address is configured but the Loopback0 address is configured, the Loopback0 address is used.
Examples
-> sflow agent ip 192.168.1.1
-> no sflow agent ip 192.168.1.1
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
The sflow agent IP address.
default
0.0.0.0
March 2011
sflow agent
page 32-3