Overview of this manual
Continued
Prerequisites
A maintenance/repair/installation craftsman working with an ABB robot must:
References
Documentation referred to in the manual, is listed in the table below.
Document name
Product manual, spare parts - CRB 15000
Product specification - CRB 15000
Product manual - OmniCore C30
Circuit diagram - CRB 15000
Operating manual - Integrator's guide OmniCore
Technical reference manual - System parameters
Application manual - Functional safety and SafeMove
Application manual - PROFINET Controller/Device
Application manual - Force control Standard for GoFa
Technical reference manual - Event logs for RobotWare 7
Revisions
Revision
A
B
Continues on next page
10
•
be trained by ABB and have the required knowledge of mechanical and
electrical installation/repair/maintenance work.
•
be trained to respond to emergencies or abnormal situations.
Tip
All documents can be found via myABB Business Portal, www.abb.com/myABB.
Description
First edition.
Published in release 21B. The following updates are made in this revision:
•
Added procedure for refitting the axis-4 cover in the replacement
procedure for the axis-5 joint unit.
•
Changed the tightening torque for the axis-4 and axis-5 covers.
•
Added procedure for refitting the swing in the replacement proced-
ure for the base.
•
Added step for removing and refitting cable bracket in replacement
procedure for the lower arm.
•
Corrected safety data.
•
Updated information about SafeMove for the CRB 15000.
•
Updated information about the arm-side interface, see
closely with the robot in a safe way on page
•
Added information about how to calibrate the robot, see
on page
•
Updated spare part number for axis-3 joint unit.
© Copyright 2021 - 2023 ABB. All rights reserved.
1051.
Document ID
3HAC079469-001
3HAC077390-001
3HAC060860-001
3HAC081041-003
3HAC065037-001
3HAC065041-001
3HAC066559-001
3HAC066558-001
3HAC083267-001
3HAC066553-001
Working
111.
Calibration
Product manual - CRB 15000
3HAC077389-001 Revision: L