Changing Display Colors - Omron K3HB-H User Manual

5.33 Changing Display Colors

2
color
L
(COLOR)
The PV display color can be switched when the comparative result
changes from PASS to HH, H, L, or LL, or when an input error occurs
during operation in RUN, adjustment, or protect levels.
This function is called "display color selection." The color switching
pattern is set using the following parameter.
Parameter
Display color selection
color
* Comparative output HH, H, L, or LL or input error status
OFF: All comparative outputs HH, H, L, and LL are OFF and no input error.
(PASS status)
ON: HH, H, L, or LL comparative output is ON or input error. (Not PASS
status)
Parameter Setting Procedure
A Press the L [LEVEL] Key for at least
3 s in RUN level to move to the initial
setting level.
0" is displayed on the level/bank
• "
L
display to indicate the initial setting
level.
B Press the L [LEVEL] Key several
times to move to the display adjustment
level.
2" is displayed on the level/bank
• "
L
display to indicate the display
adjustment level.
C Press the M [MODE] Key to change
the PV display to "color."
D Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
5.33 Changing Display Colors
Display adjustment level
Set value Status*
grn-r
OFF
ON
grn
OFF
ON
red-g
OFF
ON
red
OFF
ON
L
3 s min.
L
M
S
X V S H
PV display
color
Green
Red
Green
Red
Green
Red
0
L
0."
Displays "
L
sv. dsp
2
L
off
2."
Displays "
L
color
2
L
grn-r
color
2
L
grn-r
5-83