ADTRAN AOS Version R10.1.0 Command Reference Manual page 2458

Command Reference Guide
switchport mode
Use the switchport mode command to configure the virtual local area network (VLAN) membership
mode. To reset membership mode to the default value, use the no form of this command. Variations of this
command include:
switchport mode access
switchport mode trunk
Syntax Description
access
trunk
Default Values
By default, this is set to access.
Command History
Release 5.1
Usage Examples
The following example sets the port to be a trunk port:
(config)#interface port-channel 1
(config-p-chan1)#switchport mode trunk
60000CRG0-35E
Sets port to be a single (nontrunked) port that transmits and receives no
tagged packets.
Sets port to transmit and receive packets on all VLANs included within its
VLAN allowed list.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Port Channel Interface Command Set
2458