Table 164: Show Service-Management Subscriber-Session Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Meaning
Copyright © 2010, Juniper Networks, Inc.
User Name: client1@isp.COM, Interface: ip192.168.0.1
Service : tiered(2000000,3000000)
Non-volatile : False
Owner : AAA 41943236
State : Config ApplySuccess
Activate : True
Statistics Type : time-based and volume-based
Statistics Complete : False
Poll Interval : 0
Poll Expire : 0
Activate Time : THU MAR 02 01:21:26 2006
Time : 0
Time Expire : 0
Volume MBytes: 2
Volume Expire MBytes : 1
Input Bytes : 594
Output Bytes : 1196
Input Packets : 1
Output Packets : 2
To display information for a particular subscriber using the subscriber ID:
host1#show service-management subscriber-session 20
User Name: CLIENT50@ISP.COM, Interface: ip192.168.100.33
Id: 20
Owner/Id: CLI
Non-volatile: True
State: Active
ServiceSessions:
Name mutex
------------------- -----
internet(5000,8000)
Name Non-volatile
------------------ ------------
internet(5000,8000) True
Table 164 on page 719 lists the show service-management subscriber-session command
output fields.

Table 164: show service-management subscriber-session Output Fields

Field Name
Name
Interface
Id
mutex
Owner/Id
Owner State
----- -------------------
12 CLI Config ApplySuccess
Field Description
Name of the subscriber or name of the service session
Type and IP address of the subscriber's interface
ID number of the subscriber session
Index number of the mutex group to which the service
session belongs
Method used to activate the subscriber session (CLI,
AAA) and ID number generated by the owner
(Acct-Session-ID for AAA)
Chapter 28: Monitoring Service Manager
Operation
---------
Activate
719