Ipv6 Rpf-Route - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

ipv6 rpf-route

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ipv6 rpf-route [ vrf vrfName ] ipv6Address/addressMask
{ nextHopIpv6Address | interfaceType interfaceSpecifier } [ distance ]
no ipv6 rpf-route [ vrf vrfName ] ipv6Address/addressMask
[ nextHopIpv6Address | interfaceType interfaceSpecifier ] [ distance ]
Command introduced before JunosE Release 7.1.0.
vrf keyword and vrfName variable added in JunosE Release 7.2.0.
Customizes static IPv6 routes that the router can use to verify source addresses in
multicast packets. The no version removes the static route.
vrfName—Name of the VRF; string of 1–32 alphanumeric characters
ipv6Address—IPv6 address of the destination network
addressMask—Subnet mask for the destination network
nextHopIpv6Address—IPv6 address of the next hop
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
distance—Number in the range 0–255 that indicates the preference for this route
Global Configuration
Chapter 10: I Commands
1109