Ipv6 Route-Type - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

ipv6 route-type

Syntax
Release Information
Description
Options
Mode
1108
For BGP
ipv6 route-type [ unicast | both ]
no ipv6 route-type
For OSPF
ipv6 route-type [ unicast | multicast | both ]
no ipv6 route-type
Command introduced before JunosE Release 7.1.0.
For BGP, specifies whether BGP IPv6 routes are available only for other unicast protocols
or for both unicast protocols and multicast protocols to perform RPF checks. The no
version restores the default value, unicast.
For OSPF, specifies whether OSPF IPv6 routes are available only for unicast forwarding,
only for multicast reverse path forwarding checks, or for both. The no version restores
the default value, both.
unicast—Specifies that routes for the protocol are available only for unicast forwarding
both—Specifies that routes for the protocol are available for both unicast forwarding
and multicast route path forwarding checks
multicast—Specifies that routes for the protocol are available only for multicast route
path forwarding checks
Router Configuration
Copyright © 2010, Juniper Networks, Inc.