Ipv6 Router Isis - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ipv6 router isis

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ipv6 router isis [ tag ]
Command introduced in JunosE Release 8.2.0.
Enables the IS-IS routing protocol on an interface and specifies an IS-IS process for IPv6.
The no version disables IS-IS routing.
tag—Meaningful name for a routing process; name must be unique among all IP router
processes for a given router; if not specified, a null tag is assumed, and the process is
referenced with a null tag
Interface Configuration
Chapter 10: I Commands
1105