Connections and Cabling
Connections and Cabling
Once your switch is properly installed, you should connect all network and management cables required for
your network applications. Connections may include:
Console connector
•
Cables to NIs or transceivers
•
Network Cable Installation Warning
Never install exposed network cables outdoors. Install network cables per manufacturer requirements.
Serial Connection to the Console Port
The console port provides a serial connection to the switch is required when logging into the switch for the
first time. By default, this connector provides a DCE console connection.
Serial Connection Default Settings
baud rate
parity
data bits (word size)
stop bits
For information on modifying these settings, refer to the Switch Management Guide.
page 2-4
9600
none
8
1
OmniSwitch 6570M Hardware Users Guide
Getting Started
December 2022