Shutdown; Speed - H3C MSR 20-20 Command Reference Manual

172 C 8: G
HAPTER ENERAL
Example

shutdown

Syntax
View
Parameter
Description
Example

speed

Syntax
View
Parameter
Description
E I C
THERNET NTERFACE ONFIGURATION
# Clear the statistics of Ethernet 1/0.
<Sysname> reset counters interface ethernet 1/0
shutdown
undo shutdown
Ethernet interface view
None
Use the
shutdown
Use the
undo shutdown
In certain circumstances, modification to the interface parameters does not
immediately take effect, and therefore, you need to shut down the relative
interface to make the modification work.
# Shut down the interface Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] shutdown
# Turn on the interface Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] undo shutdown
speed { 10 | 100 | 1000 | auto }
undo speed
Ethernet interface view
10: Indicates that the interface rate is 10 Mbps.
100: Indicates that the interface rate is 100 Mbps.
1000: Indicates that the interface rate is 1000 Mbps.
auto: Indicates that the interface rate is in the auto-negotiation state.
Use the speed command to configure Ethernet interface data rate.
C
OMMANDS
command to shut down an Ethernet interface.
command to turn on Ethernet interface.