Eliminate-Pulse - H3C MSR 20-20 Command Reference Manual

Msr 20/30/50 series routers
Hide thumbs Also See for MSR 20-20:
Table of Contents

Advertisement

194
C
11: F
HAPTER
UNDAMENTAL
Parameter
Description
Example

eliminate-pulse

Syntax
View
Parameter
Description
S
I
C
ERIAL
NTERFACE
ONFIGURATION
dsr-dtr: Detects DSR (data set ready) and DTR (data terminal ready) signals of
DSU/CSU (data service unit/channel service unit).
dcd: Detects the DCD (data carrier detect) signal of the DSU/CSU on the serial
interface.
Use the
detect
detection on the serial interface.
Use the
undo detect
detection on the serial interface.
By default, data carrier and level detection is enabled on serial interfaces.
If level detection is disabled on an asynchronous serial interface, the system
automatically reports that the state of the serial interface is up with both DTR and
DSR being up without detecting whether a cable is connected. If level detection is
enabled on the interface, the system detects the DSR signal in addition to the
external cable. The interface is regarded up only when the detected DSR signal is
valid. Otherwise, it is regarded down.
When determining whether a synchronous serial interface is up or down, the
system by default detects the DSR signal, DCD signal, and presence of cable
connection. Only when the three signals are all valid will the interface be regarded
up. If level detection is disabled, the system considers that the interface is up with
both DTR and DSR being up after detecting the cable connection.
n
The modem command and the undo detect dsr-dtr command are mutually
exclusive.
# Enable data carrier detection on synchronous serial interface 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial1/0] detect dcd
eliminate-pulse
undo eliminate-pulse
Asynchronous serial interface view
None
Use the
eliminate-pulse
3.472 us, thus increasing signal reliability. This is useful when the line is seriously
interfered.
C
OMMANDS
command to enable data carrier detection as well as level
command to disable data carrier detection as well as level
command to eliminate the pulses with a width less than

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr 20-21Msr 30-16Msr 30-20Msr 30-40Msr 30-60Msr 50 ... Show all

Table of Contents