Code Nrzi; Country-Code - H3C MSR 20-20 Command Reference Manual

192 C 11: F
HAPTER UNDAMENTAL

code nrzi

Syntax
View
Parameter
Description
Example

country-code

Syntax
View
Parameter
Description
Example
S I C
ERIAL NTERFACE ONFIGURATION
code nrzi
undo code
Synchronous serial interface view
None
Use the command to set the digital signal coding format to
code nrzi
none-return-to-zero-inverse (NRZI) on the synchronous serial interface.
Use the command to restore the default, that is, NRZ.
undo code
# Set the digital signal coding format to NRZI on synchronous serial interface 1/0.
<Sysname> system-view
[Sysname] interface serial 1/0
[Sysname-Serial1/0] code nrzi
country-code area-name
undo country-code
Asynchronous serial interface view, AM interface view
area-name: Area name, which can be australia, austria, belgium, brazil, bulgaria,
canada, china, czechoslovakia, denmark, finland, france, germany, greece,
hongkong, hungary, india, ireland, israel, italy, japan, korea, luxembourg,
malaysia, mexico, netherlands, new-zealand, norway, philippines, poland,
portugal, russia, singapore, southafrica, spain, sweden, switzerland, taiwan,
united-kingdom, and united-states.
Use the
country-code
connected to the asynchronous serial or AM interface.
Use the undo country-code
united-states.
You may use this command to adapt to the modem coding formats in different
countries and areas.
Before you can use this command on an asynchronous serial interface, you must
first enable the modem command.
# Set the country-code to china.
C
OMMANDS
command to set the coding format of the modem
command to restore the default, that is,