Flow-Interval; Group-Member - H3C MSR 20-20 Command Reference Manual

178 C 9: C
HAPTER ONFIGURATION

flow-interval

Syntax
View
Parameter
Description
Example

group-member

Syntax
View
Parameters
C E I
OMMANDS FOR THERNET NTERFACES IN
Member of group2:
None
# Display the details of the manual port group named group 1.
<Sysname> display port-group manual name group1
Member of group1:
Ethernet1/0
Ethernet1/3
Ethernet1/6
Table 15 Description on the fields of the display port-group manual command
Field
Member of group
flow-interval interval
undo flow-interval
System view
interval: Time interval at which interface statistics is collected, in the range of 5 to
300 seconds, a multiple of 5. The system default is 300 seconds.
Use the
flow-interval
interface statistics.
Use the undo flow-interval
# Set the time interval for collecting interface statistics to 100 seconds.
<Sysname> system-view
[Sysname] flow-interval 100
group-member interface-list
undo group-member interface-list
Port group view
interface-list: Ethernet interface list, in the form of { interface-type
interface-number [ to interface-type interface-number ] } &<1-10>, where
&<1-10> indicates that you can specify up to 10 interfaces or interface ranges
B M
RIDGE ODE
Ethernet1/1
Ethernet1/4
Ethernet1/7
Description
Member ports of the manual port group
command to configure the time interval for collecting
command to restore the default interval.
Ethernet1/2
Ethernet1/5
Ethernet2/0