Invert Transmit-Clock - H3C MSR 20-20 Command Reference Manual

196 C 11: F
HAPTER UNDAMENTAL
Description
Related command:
Example

invert transmit-clock

Syntax
View
Parameter
Description
Related command:
Example
S I C
ERIAL NTERFACE ONFIGURATION
Use the invert receive-clock
DTE-side synchronous serial interface.
Use the
undo invert transmit-clock
By default, receive-clock signal inversion is disabled on DTE-side synchronous serial
interfaces.
Sometimes, you may need to invert the receive-clock signal on a DTE-side serial
interface to eliminate the half clock-period delay on the line. This command is
necessary only for some special DCE devices. In common applications, clock must
not be inverted.
physical-mode, invert transmit-clock, clock (serial interface view).
# Invert the receive-clock on DTE-side synchronous serial interface 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial1/0] invert receive-clock
invert transmit-clock
undo invert transmit-clock
Serial interface view
None
Use the invert transmit-clock
the DTE-side synchronous serial interface.
Use the
undo invert transmit-clock
By default, transmit-clock signal inversion is disabled on DTE-side synchronous
serial interfaces.
Sometimes, you may need to invert the receive-clock signal on a DTE-side serial
interface to eliminate the half clock-period delay on the line. This command is
necessary only for some special DCE devices. In common applications, clock must
not be inverted.
physical-mode, invert receive-clock, clock (serial interface view).
# Invert the transmit-clock on DTE-side synchronous serial interface 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial1/0] invert transmit-clock
C
OMMANDS
command to invert the receive-clock signal on the
command to restore the default.
command to invert the transmit-clock signal on
command to restore the default.