Bootrom Update File - H3C MSR 20-20 Command Reference Manual

Parameter
Description
Example

bootrom update file

Syntax
View
Parameter
Description
attenuation: Transmit power attenuation, in the range 0 to 12.
Use the
adsl tx-attenuation
the ADSL interface.
Use the
undo adsl tx-attenuation
# Set the transmit power attenuation to 10 for ATM ADSL interface 2/0.
<Sysname> system-view
[Sysname] interface atm 2/0
[Sysname-Atm2/0] adsl tx-attenuation 10
bootrom update file file-url slot slot-no-list [ subslot subslot-no-list ] [ all | part ]
User view
file-url: File name (including the path) of the software to be upgraded, a string of
1 to 135 characters.
slot slot-no-list: List of slot numbers, representing multiple cards. The argument
slot-no-list appears in the form of { slot-no [ to slot-no ] }&<1-7>, where slot-no is
the slot number of a card, in the range of 1 to the maximum slot number, and
&<1-7> means that you can specify up to 7 slot numbers or slot number ranges
for this argument. The maximum slot number differs with device models.
subslot subslot-no-list: List of sub-slot numbers, representing multiple sub-cards.
The argument subslot-no-list appears in the form of { subslot-no [ to
subslot-no ] }&<1-7>, where subslot-no is the sub-slot number of a sub-card, in
the range of 1 to the maximum sub-slot number, and &<1-7> means that you can
specify up to 7 slot numbers or slot number ranges for this argument. The
maximum sub-slot number differs with device models.
part: Upgrades only the extension part of the Boot ROM.
all: Upgrades the entire Boot ROM.
Use the bootrom update file
card.
By default, the entire BootROM is upgraded.
This feature is only valid for ADSL2+ cards with CPUs.
The upgradeable software includes Boot ROM and ADSL2+ card software. Before
you do that, you first need to FTP or load the new software file by other means to
the Flash or CF card on your device and save it. Before performing an upgrade,
you need to shut down the interface with the shutdown command if the
interface is up. After completing the upgrade, you need to bring the interface up
with the undo shutdown command.
command to set a transmit power attenuation for
command to restore the default, that is, 0.
command to upgrade software on an ADSL2+
145