Table 7 Description on the fields of the display interface pos command
Field
Internet protocol processing
Link layer protocol is PPP
LCP opened, IPCP opened, IP6CP opened
Physical layer is Pos1/0, Baudrate is 155520000 bps
Scramble enabled, crc 32, clock slave, loopback not
set
Output queue : (Urgent queue : Size/Length/Discards)
Output queue : (Protocol queue :
Size/Length/Discards)
Output queue : (FIFO queuing : Size/Length/Discards)
SDH alarm
section layer
line layer
path layer
C2(Rx), C2(Tx)
Rx: J0
Tx: J0
Rx: J1
Tx: J1
SDH error
section layer
line layer
path layer
Last 5 seconds input rate 0 bytes/sec, 0 bits/sec, 0
packets/sec
Last 5 seconds output rate 0 bytes/sec, 0 bits/sec, 0
packets/sec
1133 packets input, 14004 bytes, 0 drops
1133 packets output, 14008 bytes, 0 drops
Description
IP protocol processing capability,
enabled or disabled
Link layer protocol of the POS
interface and loopback detection state
LCP state, IPCP state, and IPv6CP state
Physical interface and baudrate
Payload scrambling state, CRC count,
clock mode, and loopback state on
the interface
Output queues:
Urgent queue in
■
size/length/discards
Protocol queue in
■
size/length/discards
FIFO queue in size/length/discards
■
SDH alarm counters (or SONET alarm
counters depending on framing
format) for:
Section layer alarms, which could
■
be OOF, LOF, and LOS
Line layer alarms, which could be
■
AIS and RDI
Path layer alarms, which could be
■
LOP, AIS, and RDI
Received and transmitted C2 bytes
■
(C2 is the signal flag byte)
Received and transmitted J0
■
overhead bytes (J0 is the section
layer trace byte)
Received and transmitted J1 overhead
bytes (J1 is the path layer trace byte)
SDH error counters (or SONET error
counters depending on framing
format). They are:
B1 for section layer errors
B2 for line layer errors and M1 for
remote line layer errors
B3 for path layer errors and G1 for
remote path layer errors
Input rate in Bps, bps, and pps in the
last five seconds
Output rate in Bps, bps, and pps in the
last five seconds
Count of input and discarded traffic in
both packets and bytes
Count of output and discarded traffic
in both packets and bytes
153