Adsl Standard; Adsl Tx-Attenuation - H3C MSR 20-20 Command Reference Manual

144 C 6: ADSL I
HAPTER

adsl standard

Syntax
View
Parameter
Description
Example

adsl tx-attenuation

Syntax
View
C C
NTERFACE ONFIGURATION OMMANDS
adsl standard { auto | g9923 | g9925 | gdmt | glite | t1413 }
undo adsl standard
ATM (ADSL) interface view
auto: Auto-negotiation mode.
g9923: ADSL2 (G992.3) standard.
g9925: ADSL2+ (G992.5) standard.
gdmt: G.DMT (G992.1) standard.
glite: G.Lite (G992.2) standard.
t1413: T1.413 standard.
Use the
adsl standard
interface.
Use the
undo adsl standard
auto-negotiation.
Note that:
ADSL-I module does not support G.Lite (G992.2) standard and T1.413
■
standard.
To bring the standard configured by the adsl standard command into effect
■
immediately, you need to re-activate the interface by either the shutdown and
undo shutdown commands or the activate and undo activate commands.
# Apply the standard T1.413 to ATM interface 2/0.
<Sysname> system-view
[Sysname] interface atm 2/0
[Sysname-Atm2/0]adsl standard t1413
[Sysname -Atm2/0] shutdown
[Sysname -Atm2/0]undo shutdown
adsl tx-attenuation attenuation
undo adsl tx-attenuation
ATM (ADSL) interface view
command to set the standard applied to an ADSL
command to restore the default, that is,