Display Interface Pos - H3C MSR 20-20 Command Reference Manual

152 C 7: POS I
HAPTER NTERFACE
Parameter
Description
Example

display interface pos

Syntax
View
Parameter
Description
Example
C C
ONFIGURATION OMMANDS
16: Sets CRC length to 16 bits.
32: Sets CRC length to 32 bits.
Use the command to set the CRC length on the POS interface.
crc
Use the undo crc command to restore the default, that is, 32 bits.
# Set the CRC length on interface POS 1/0 to 16 bits.
<Sysname> system-view
[Sysname] interface pos 1/0
[Sysname-Pos1/0] crc 16
display interface pos [ interface-number ]
Any view
interface-number: Interface number.
Use the
display interface pos
information of the specified or all POS interfaces.
# Display the status and configuration information of the interface POS 1/0.
<Sysname> display interface pos 1/0
Pos1/0 current state: UP
Line protocol current state: UP
Description: Pos0/0/0 Interface
The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
Internet Address is 13.13.13.14/8 Primary
Link layer protocol is PPP
LCP opened, IPCP opened, IP6CP opened
Physical is Pos1/0, baudrate: 155520000
Output queue : (Urgent queuing : Size/Length/Discards)
Output queue : (Protocol queuing : Length)
Output queue : (FIFO queuing : Size/Length/Discards)
Last 5 seconds input:
Last 5 seconds output:
1133 packets input, 14004 bytes, 0 drops
1133 packets output, 14008 bytes, 0 drops
Table 7 Description on the fields of the display interface pos command
Field
Pos1/0 current state
Line protocol current state
Description
The Maximum Transmit Unit is 1500, Hold timer is
10(sec)
command to display the status and configuration
0/500/0
0 bytes/sec 0 packets/sec
0 bytes/sec 0 packets/sec
Description
Current state of the POS interface
Link layer state of the POS interface
Description on the POS interface
MTU of the POS interface and the
interval at which the link layer
protocol sends keepalives
0/50/0
0/75/0