Display Dsl Version - H3C MSR 20-20 Command Reference Manual

136 C 5: G.SHDSL I
HAPTER

display dsl version

Syntax
View
Parameter
Description
Example
C C
NTERFACE ONFIGURATION OMMANDS
Table 2 Description on the fields of the display dsl status command
Field
Rmt Provider Code
Rmt Vendor Data
display dsl version interface atm interface-number
Any view
interface-number: Specifies a G.SHDSL interface to view the version and support
capability information about it.
Use the
display dsl version
capability information about the specified G.SHDSL interface.
# Display the G.SHDSL version of G.SHDSL interface ATM 5/0.
<Sysname> display dsl version interface atm 5/0
Dsl Line Type:
ATM SAR Device:
ATM SAR Revision:
Chipset Vendor:
Firmware Rel-Rev:
DSP Version:
PCB Version:
CPLD Version:
Driver Version:
Hardware Version:
ITU G991.2 ANNEX A:
ITU G991.2 ANNEX B:
Table 3 Description on the fields of the display dsl version interface atm command
Field
Dsl line Type
ATM SAR Device
ATM SAR Revision
Chipset Vendor
Firmware Rel-Rev
DSP Version
PCB Version
CPLD Version
Driver Version
Hardware Version
ITU G991.2 ANNEX A, ITU
G991.2 ANNEX B
Description
Remote code of the chip provider
Remote code of the chip vendor
command to display the version and support
G.SHDSL
0x823614f1
0x02
GSPN
R2.3.1-0
1
0.0
0.0
2.0
1.0
Supported
Supported
Description
Type of the user access line
Identifier of the SAR chip
Revision identifier of the SAR chip
Identifier of the DSL chipset vendor
Identifier and version of the firmware
--
--
Logic version
Driver software version
--
Standards and the annexes supported by the interface