Display Ip Interface Pos; Display Ipv6 Interface Pos - H3C MSR 20-20 Command Reference Manual

154 C 7: POS I
HAPTER NTERFACE

display ip interface pos

Syntax
View
Parameter
Description
Example

display ipv6 interface pos

Syntax
View
Parameter
C C
ONFIGURATION OMMANDS
display ip interface pos interface-number
Any view
interface-number: Interface number.
Use the
display ip interface pos
and status information of the specified POS interface.
# Display IP-related status and configuration information about the interface POS
1/0.
<Sysname> display ip interface pos 1/0
Pos1/0 current state :UP
Line protocol current state :UP
Internet Address is 13.13.13.13/8 Primary
Broadcast address : 13.255.255.255
The Maximum Transmit Unit : 1500 bytes
ip fast-forwarding incoming packets state is Enabled
ip fast-forwarding outgoing packets state is Enabled
input packets : 5, bytes : 420, multicasts : 0
output packets : 5, bytes : 420, multicasts : 0
TTL invalid packet number:
ICMP packet input number:
Echo reply:
Unreachable:
Source quench:
Routing redirect:
Echo request:
Router advert:
Router solicit:
Time exceed:
IP header bad:
Timestamp request:
Timestamp reply:
Information request:
Information reply:
Netmask request:
Netmask reply:
Unknown type:
display ipv6 interface pos interface-number
Any view
interface-number: Interface number.
command to view the IP-related configuration
0
5
5
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0