Variables; System-Defined Variables - Omron sysmac NA Series User Manual

3-4

Variables

This section describes the system-defined variables used by the Ladder Monitor.
3-4-1

System-defined Variables

This section describes the system-defined variables that were added for use by the Ladder Monitor.
Added System Enumeration Variable Table
The following enumeration variable has been added for the parameter setting when the Ladder Monitor
starts up.
_eHMI_LADDERMONITOR_PARTS
NA-series Ladder Monitor User's Manual (V124)
Data type name
3 Ladder Monitor Setup
Description
Specifies the circuit to search.
All: All circuits are search targets.
Coil: Only coils are search targets.
3
3 - 7