Resetting Measurements - Omron K3HB-H User Manual

Section 5 Functions and Operations

5.7 Resetting Measurements

Remarks
5-26
When the RESET input turns ON or the
for at least 1 s, the maximum value, minimum value, and outputs are
cleared. Measurement is not performed during RESET input.
Max.
value
Min.
value
Comparative
set value HH/H
Comparative
set value LL/L
RESET input
Output
HH/H
Output LL/L
• The display during RESET input is "-----" and all outputs are
OFF.
• HOLD and TIMING inputs are accepted, but measurement is
disabled during RESET input.
• The RESET input is disabled during "serr."
Not performing measurements for set intervals
[MAX/MIN] Key is pressed
Measurement
value
No measurement
status
P.5-27
X V S H