Display Settings - Omron sysmac NA Series User Manual

2 Basic Ladder Monitor Operations
2-2-4

Display Settings

Make the settings related to the Ladder Monitor display.
(a)
(b)
(c)
No. Name
(a) Font size
(b) Fixed length display
mode
(c) Change
Comment
(d) Top Menu
*1. Some font sizes displayed inside circuit parts are fixed, such as function block definition names.
Additional Information
Comments set on the external variables are prioritized to be displayed on the ladder monitor. If
there is no comment on external variables, comments on global variables are displayed.
2 - 6
Description
Selects the font size for the POU Explorer and
*1
Ladder Viewer . The POU Explorer is hidden
when all buttons are set to Off.
Selects the comment display method.
: Displays all circuit parts in cells with
the same width.
Therefore, only the part of a com-
ment that fits the width of the cell is
displayed. The entire comment can
be temporarily displayed by tapping
the comment.
: Displays comments by aligning the
cell width to the comment length.
Changes the comment to display. Comment 1 is
displayed in the initial state.
Opens the top menu.
(d)
Reference
2-2-6 Selecting Section to
Display on page 2-8
2-2-1 Top Menu on page 2-3
NA-series Ladder Monitor User's Manual (V124)