Disabling Cold Junction Compensation - Omron K3HB-H User Manual

5.10 Disabling Cold Junction Compensation

f cjc
L
(CJC)
5.10 Disabling Cold Junction Compensation
This function disables
temperature compensation).
Parameter
Cold junction
compensation
cjc
Parameter Setting Procedure
A Press the L [LEVEL] Key for at least
3 s in RUN level to move to the initial
setting level.
0" is displayed on the level/bank
• "
L
display to indicate the initial setting
level.
B Press the M [MODE] Key several times
to change the PV display to "amov."
• This parameter is not displayed for
the initial status due to setting level
protect.
Refer to "Limiting Key Operations"
(P.5-102) for information on removing
setting level protect.
C Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
D Use the U [UP] and S [SHIFT] Keys
to set the password "-0169." Press the
M [MODE] Key to move to the
advanced function setting level.
f" is displayed on the level/bank
• "
L
display to indicate the advanced
function setting level.
E Press the M [MODE] Key several times
to change the PV display to "cjc."
Advanced function setting level
cold junction compensation
Set value Meaning of set value
on
Room temperature display
(enabled)
off
0.0 C (disabled)
L
3 s min.
M
S
U S
M
M
H
(terminal
0
L
0."
Displays "
L
amov
0
L
0
amov
0
L
00000
init
f
L
off
f."
Displays "
L
cjc
f
L
on
5-31