JunosE 11.3.x Command Reference Guide A to M
dsu mode
Syntax
Release Information
Description
Options
Mode
548
dsu mode { 0 | 2 }
no dsu mode
Command introduced before JunosE Release 7.1.0.
Sets the DSU mode for the lines. The no version clears the dsu mode. If you issue this
command, be sure to issue the dsu bandwidth and scramble commands. Similarly, if
you issue the no version, be sure to issue the no versions of thedsu bandwidth and
scramble commands; otherwise, the interface may drop packets unexpectedly.
0—Sets digital Link mode
2—Sets Larscom mode
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.