Dsr-Detect - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

dsr-detect

Syntax
Release Information
Description
Mode
546
[ no ] dsr-detect
Command introduced before JunosE Release 7.1.0.
Requires that a DSR signal be detected on the line for a user to log into the console. DSR
is carried on pin 6 of the SRP module's RS-232 (DB-9) connector. The DSR input must
be connected to the DSR output of a modem or the DTR output of another DTE device,
such as a terminal server, that supports this signal. If a session is in progress and the DSR
signal is lost, the user is logged out automatically. The no version restores the default of
no DSR required.
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.