ipv6 share-interface
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ipv6 share-interface interfaceType interfaceSpecifier
no ipv6 share-interface
Command introduced before JunosE Release 7.1.0.
Specifies the layer 2 interface that an IPv6 interface will share in the current virtual router.
The no version removes the association between the layer 2 interface and the shared
IPv6 interface.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Interface Configuration
Chapter 10: I Commands
1111