Show Ethernet-Service Nni - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show ethernet-service nni

show ethernet-service nni
Displays configuration information for VLAN Stacking Network Network Interface (NNI) ports.
show ethernet-service nni [port slot/port | linkagg linkagg_id]
Syntax Definitions
slot/port
linkagg_id
Defaults
By default, all NNI ports are displayed if a slot/port or link aggregate ID number is not specified.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Specify a slot/port or link aggregate ID number to display information for a single port or link
aggregate ID.
Examples
-> show ethernet-service nni
Port TPID
--------+--------+-----------------------+
1/22 0x8100
1/23 0x8100
-> show ethernet-service nni 1/23
Port TPID
--------+--------+-----------------------+
1/23 0x8100
output definitions
Port
TPID
stp
mvrp
page 34-38
The slot number for the module and the physical port number on that
module (for example, 3/1 specifies port 1 on slot 3).
The link aggregate ID number.
Legacy BPDU
stp mvrp
Disable Disable
Disable Disable
Legacy BPDU
stp mvrp
Disable Disable
The slot/port number or link aggregate ID for the NNI port.
The vendor TPID value configured for the NNI port.
Whether or not Spanning Tree legacy BPDU processing is enabled for
the NNI port.
Whether or not MVRP legacy BPDU processing is enabled for the
port.
VLAN Stacking Commands
OmniSwitch CLI Reference Guide March 2011