Show Ethernet-Service Nni - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show ethernet-service nni

Displays configuration information for VLAN Stacking Network Network Interface (NNI) ports.
show ethernet-services nni [slot/port | linkagg agg_num]
Syntax Definitions
slot/port
agg_num
Defaults
By default, all NNI ports are displayed if a slot/port or link aggregate ID number is not specified.
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
Specify a slot/port or link aggregate ID number to display information for a single slot/port or link aggre-
gate ID.
Examples
-> show ethernet-service nni
Port TPID
--------+--------+-----------------------+
1/22 0x8100
1/23 0x8100
- show ethernet-service nni 1/23
Port TPID
--------+--------+-----------------------+
1/23 0x8100
output definitions
Port
TPID
stp
gvrp
page 24-40
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The link aggregate ID number (0–31).
Legacy BPDU
stp gvrp
Disable Disable
Disable Disable
Legacy BPDU
stp gvrp
Disable Disable
The slot/port number or link aggregate ID for the NNI port.
The vendor TPID value configured for the NNI port.
Whether or not Spanning Tree legacy BPDU processing is enabled for
the NNI port.
Whether or not GVRP legacy BPDU processing is enabled for the port.
VLAN Stacking Commands
OmniSwitch CLI Reference Guide November 2009