Show Ethernet-Service Vlan - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show ethernet-service vlan

show ethernet-service vlan
Displays a list of SVLANs configured on the switch.
show ethernet-service vlan [svlan_id-[svlan_id2]]
Syntax Definitions
svlan_id
-svlan_id2
Defaults
By default, all SVLANs are displayed if an SVLAN or range of SVLANs are not specified with this
command.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Specify a single SVLAN ID or a range of SVLAN IDs to display configuration information for the
specific SVLANs.
Examples
-> show ethernet-service vlan
vlan
+--------+------------+-------------------------+
4010 svlan
4020 mgmt
4021 svlan
-> show ethernet-service vlan 1001
Name
Type
Administrative State
Operational State
IP Router Port
IP MTU
-> show ethernet-service vlan 1000-1004
vlan type admin
-----+------+-----+-----+-----+-------+------------
1000 vstk Ena
1001 vstk Ena
1002 vstk Ena
1003 vstk Ena
1004 vstk Ena
page 34-28
The VLAN ID number identifying the SVLAN.
The last VLAN ID number in a range of SVLANs that you want to
specify (for example 10-12 specifies VLANs 10, 11, and 12).
Type name
Customer ABC
Provider Management
Customer XYZ
: VLAN 1001,
: Service Vlan,
: enabled,
: disabled,
: disabled,
: 1500
oper ip mtu
Dis Dis 1500
Dis Dis 1500
Dis Dis 1500
Dis Dis 1500
Dis Dis 1500
name
VLAN 1000
VLAN 1001
VLAN 1002
VLAN 1003
VLAN 1004
OmniSwitch CLI Reference Guide
VLAN Stacking Commands
March 2011