Configuring A Vlan Stacking Service - Alcatel-Lucent OmniSwitch AOS Release 7 Manual

Configuring VLAN Stacking Services
Note that when an SVLAN is deleted, all port associations with the SVLAN are also removed.
Use the show ethernet-service vlan
the switch.

Configuring a VLAN Stacking Service

A VLAN Stacking service is identified by a name. The
to create a service and assign the service to an SVLAN ID, depending on the type of traffic the service will
process. The ID specified with this command identifies the SVLAN that will carry traffic for the service.
Each service is associated with only one SVLAN, but an SVLAN may belong to multiple services.
To create a VLAN Stacking service, use the ethernet-service service-name command and specify a name
and SVLAN ID. For example, the following command creates a service named "Video-Service" and asso-
ciates the service with SVLAN 300:
-> ethernet-service service-name Video-Service svlan 300
The SVLAN ID specified with this command must already exist in the switch configuration; entering a
standard VLAN ID is not allowed. See
Once the VLAN Stacking service is created, the name is used to configure and display all components
associated with that service. The service name provides a single point of reference for a specific VLAN
Stacking configuration. For example, the following
the service name identifies a VLAN Stacking service and components related to that service:
-> show ethernet-service
Service Name : VideoOne
SVLAN : 300
NNI(s) : 2/1, 3/2
SAP Id : 20
UNIs
CVLAN(s)
sap-profile : sap-video1
SAP Id : 30
UNIs
CVLAN(s)
sap-profile : sap-video2
Service Name : CustomerABC
SVLAN : 255
NNI(s) : 1/22
SAP Id : 10
UNIs
CVLAN(s)
sap-profile : default-sap-profile
-> show ethernet-service service-name CustomerABC
Service Name : CustomerABC
SVLAN : 255
NNI(s) : 1/22
SAP Id : 10
UNIs
CVLAN(s)
sap-profile : default-sap-profile
page 27-12
command to display a list of VLAN Stacking VLANs configured for
"Configuring SVLANs" on page 27-11
: 1/1, 1/2
: 10, 20
: 1/3
: untagged, 40
: 2/10, 2/11
: 500, 600
: 2/10, 2/11
: 500, 600
OmniSwitch AOS Release 7 Network Configuration Guide
ethernet-service service-name
show ethernet-service command display shows how
Configuring VLAN Stacking
command is used
for more information.
March 2011