show ethernet-service vlan
Displays a list of SVLANs configured fro the switch.
show ethernet-services vlan [svid1-[svid2]]
Syntax Definitions
svid1
-svid2
Defaults
By default, all SVLANs are displayed if an SVLAN or range of SVLANs is not specified with this
command.
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
Specify a single SVLAN ID or a range of SVLAN IDs to display configuration information for a specific
SVLAN or range of SVLANs.
Examples
-> show ethernet-services vlan
vlan
+--------+------------+-------------------------+
4010
svlan
4011
ipmvlan
4020
mgmt
4021
svlan
4030
ipmvlan
-> show ethernet-service vlan 4010
Name
Traffic Type
output definitions
vlan
Traffic Type
name
Release History
Release 6.6.1; command was introduced.
page 24-30
The VLAN ID number identifying the SVLAN (1–4094).
The last VLAN ID number in a range of SVLANs that you want to
specify (e.g. 10-12 specifies VLANs 10, 11, and 12).
Type
Customer ABC
Video-Service
Provider Management
Customer XYZ
HBO
: Customer ABC
: svlan
The SVLAN ID number identifying the instance.
The type of SVLAN (svlan = customer traffic, mgmt = management
traffic, or ipmvlan = IP Multicast VLAN traffic).
The user-defined text description for the SVLAN. By default, the
SVLAN ID is specified for the description.
name
OmniSwitch CLI Reference Guide
VLAN Stacking Commands
November 2009